• Home
  • Crane USA
  • Our Websites
    • APD
    • Holley Australia
    • Quickfuel Australia
    • Magnafuel Australia
  • FAQs
  • Where To Buy
  • 0

New Hi6RC

NEW HI-6RC Ignition

Daytona Beach, FL.  Crane Cams introduces the all new HI-6RC Ignition.


HI-6RC IgnitionCrane Cams has again expanded its’ lineup of advanced state-of-the art race proven ignitions.  The all new HI-6RC uses computer surface mount technology, in a fully digital design for greater reliability – just what Crane Cams Ignition is known for.  Acceptable for use in PASS, CRA, ASAMT, Jegs All Star Tour, and WISSOTA racing series, the HI-6RC has a 6 pin weatherpak type harness plug for ease of installation, with a standard mag trigger input that can come from any type of magnetic trigger distributor.

The all new 20 degree start retard is built in so the HI-6RC assists the starter motor to fire the engine – especially when smaller flywheel and clutch packages are being used in the driveline.  To protect your racing investment, the HI-6RC has shock mounts included to guard against vibration, and is fully potted with a new, soft urethane for heat, dirt, and moisture protection.  Like all Crane Cams ignition boxes, the lightweight, anodised aluminium housing has cooling fins, providing more surface area to dissipate heat.  The HI-6RC is easily the most reliable CD ignition available, especially when used with Crane Cams’ PS92N E-Core Coil.

Want to choose your rev limit amount?  Go ahead, because there is an adjustable rev limiter built in with larger rotary switches that go from 900–9,900 RPM in 100 RPM increments, all of which are accurate within 30 RPM of the easy “click-in” detents, locking in the value.  Also, it is a sequential type, which means it is soft on the motor, no loud popping at high RPM, potentially damaging the motor.

Hard to start? No problem with a built-in 20 degree start retard feature.  Just wire to the start button, and you get retard to save the starter motor until the motor fires, then back to full advance.

Low battery a problem at the track? The HI-6RC runs with no loss of output all the way down to 8v.  The HI-6RC has a red light on the end cap to show you have a good power supply, and during cranking, it flashes to show a good trigger signal—another Crane Cams Ignition first, since 1995!

The HI-6RC for circle track, drag racing, or street performance, designed to perform and last.

Part Numbers

HI-6RC Ignition............................................6000-6700

PS92N E-core coil.........................................730-0192

Camshaft Break-In

Click to read more:

Flat Tappet Camshaft Break-In Procedure

Reasons and Causes for Cam Failure

Holden V8 Cams

Powering Australia’s TOUGHEST HOLDEN V8s for over 30 years!

**UPDATED 1/8/16**

>>Download The Holden V8 Cam Listing!

>>Cams Roller Lifters For Holden V8 Engines

Blue Racer Cams

>>Computer-Designed Cams for Street Performance!

>>Download the Blue Racer Cam Listing here!

New Products

New Product—Break-In Engine Oil 10W-40

NEW Viton Seals

New Hi6RC

New Hydraulic Roller Lifters

ULTRA-PRO™ ROLLER LIFTERS

GOLD RACE™ Rockers

Tech Bulletins

Currently Available Bulletins:

 

NEW - Flat Tappet Camshaft Break-in Procedure

 

NEW - Reasons and Causes for Cam Failure

 

New Aluminium Roller Rocker Arms Available

 

New Generation Of Enhanced Hydraulic Roller Lifters

 

Steel Distributor Gears for use with Cast or Billet Cams

 

Flat Tappet Camshaft Break-in Procedure

 

Adjusting Hydraulic Lifter Pre-load

 

Three Distributor Models Cover Most Everything from Street to Speedway!

 

Ignitions for Racing and Street Applications

 

Cam & Lifter Recommendations

 

Crane’s Always Known How to Make Cams Go Rump, Whap and Thump!

 

Valve Spring Retainer Height Chart!

 

Mechanical Roller Lifters For Street & Competition!

 

HELP

  • FAQs
  • Crane USA
  • APD
  • Where To Buy

Contact Details

Automotive Performance Distributors
167 Railway Tce
Mile End South
5031 South Australia

Ph. 08 83635566
[email protected]

About Us

Automotive Performance Distributors Pty. Ltd.(Formerly Crane Technologies Pty. Ltd) was set up in 1997 as a Joint Venture with Crane Cams in the USA, to distribute the range of Crane products to retailers & wholesalers throughout Australia.

Automotive Performance Distributors is 100% Australian Owned and Operated.

2019 Automotive Performance Distributors Scroll to Top